450/750V  600/1000V Mica+LSZH Insulated fire resistant Power Cables (Single Core)(CU/MGT+LSZH 450/750V Class 2)(CU/MGT+LSZH 600/1000V Class 2)Application:This cable is used in fire extinguishing systems,Website:http://www.ue-cable.com, sprinklers, control panels, and exit lights in high-rise buildings, hotels, hospitals, sub-ways, and public facilities.STANDARDS:Basic design to BS 7211FIRE PERFORMANCECircuit IntegrityIEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180);CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)System circuit integrityDIN 4102-12, E30 depending on lay systemFlame Retardance (Single VerticalWire Test)EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2;VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*Reduced Fire Propagation(Vertically-mounted bundled wires& cable test)EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4Halogen FreeIEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*No Corrosive Gas EmissionIEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*Minimum Smoke EmissionIEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*No Toxic gasesNES 02-713; NF C 20-454Note: Asterisk * denotes superseded standard.VOLTAGE RATING450/750V & 600/1000VCABLE CONSTRUCTION Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2Fire Barrier: Mica glass tapeInsulation: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.)COLOUR CODEInsulation Colour: Orange (other colors upon request)Physical AND THERMAL PROPERTIESTemperature range during operation (fixed state): -30°C – +90°CTemperature range during installation (mobile state): -20°C – +50°CMinimum bending radius: 6 x Overall DiameterElectrical PROPERTIESDielectric test:600/1000V: 3500 V r.m.s. x 5' (core/core);450/750V: 2500 V r.m.s. x 5' (core/core)Insulation resistance20 MΩ x km (at 20°C)Short circuit temperature250°CCONSTRUCTION PARAMETERSConductor450/750V600/1000VNominal Cross Section AreaNo./ Nominal Diameter of trandsNominalInsulationThicknessNominalOverallDiameterApprox.WeightNominalInsulationThicknessNominalOverallDiameterApprox.Weightmm2No./mmmmmmkg/kmmmmmkg/km1.57/0.530.73.5250.83.8302.57/0.670.84.1350.84.24047/0.850.84.65215.37067/1.040.85.2721696107/1.3516.512016.6130167/1.7017.618017.7200257/2.141.292751.29.1290357/2.521.210.23701.210.33905019/2.521.411.85001.411.95207019/2.141.413.47001.413.57309519.2.521.615.89801.615.999015037/2.521.818.815001.818.9152018537/2.522211900221.2190024037/2.522.225.725002.225.8255030037/2.522.428.631402.428.8315040061/2.852.63240002.632.2400050061/3.202.835.550002.835.75000630127/2.522.839.563002.839.76360Electrical PROPERTIESConductor Operating Temperature : 90°CAmbient Temperature : 30°CCurrent-Carrying Capacities (Amp)ConductorcrosssectionareaReference Method 4(enclosed in conduitin thermally insulatingwall etc)ReferenceMethod 3(enclosed inconduit on a wall or in trunkingetc)Reference Method 1 (clipped direct)Reference Method 11 (on a perforated cable tray, horizontal orvertical)Reference Method 12 (free air)Horizontal flat spacedVertical flat spacedTrefoil2 cables,single-phasea.c. or d.c.3 or 4cables,3-phasea.c.2cables,single-3 or 4cables,3-phasea.c.2 cables,single-phasea.c. or d.c. flatand touching3 or 4cables,3-phasea.c. flatandtouchingor trefoil2 cables,single-phase a.c.or d.c. or flat and touching3 or 4cables,3-phasea.c. flatand touchingor trefoil2 cables,single-phasea.c. or d.c. or 3 cables threephase2 cables,single-phasea.c. or d.c. or3 cables threephase3 cables,trefoil3-phasephase a.c.phase a.c.a.c. ord.c123456789101112mm2AAAAAAAAAAA1.5181722192523-----2.5242330263431-----4333040354641-----6433951455954-----10585371638174-----167670958510999-----251009112611114313015814018316313835125111156138176161195176226203171501491351891682282092932152742462097018917024021429326830827935131827095228205290259355326375341426389330120263235336299413379436398495453385150300270375328476436505461570524445185341306426370545500579530651600511240400358500433644590686630769711606300459410573493743681794730886824701400--6845848687939158491065994820500--783666990904104497312281150936630--9007641130103311911115142313381069Voltage Drop (Per Amp Per Meter)NominalCrossSectionArea2 cablesd.c.2 cables, single-phase a.c.3 or 4 cables, 3-phase a.c.Ref. Methods 3and 4 (enclosedin conduit etc,in or on a wall)Ref. Methods 1and 11 (clippeddirect or on traystouching)Ref. Methods 3and 4 (enclosedin conduit etc,in or on a wall)Ref. Methods 1,Ref. Methods 1 and 1111 and 12(in trefoil)(Flat and touching)1234567mm2mV/A/mmV/A/mmV/A/mmV/A/mmV/A/mmV/A/m1.531　31　　27　　27　　27　　27　2.519　19　　16　　16　　16　　16　433　12　　10　　10　　10　　10　67.8　7.9　　6.8　　6.8　　6.8　　6.8　104.7　4.7　　4.7　　4　　4　　4　162.9　2.9　　2.9　　2.5　　2.5　　2.5　　　rxzrxzrxzrxzrxz251.851.60.311.91.850.191.851.60.271.651.60.1651.61.60.191.6351.351.350.291.351.350.181.351.150.251.151.150.1551.51.150.181.15500.9910.291.050.990.1810.870.250.90.860.1550.870.860.180.87700.680.70.280.750.680.1750.710.60.240.650.590.150.610.590.1750.62950.490.510.270.580.490.170.520.440.230.50.430.1450.450.430.170.461200.390.410.260.480.390.1650.430.350.230.420.340.140.370.340.1650.381500.320.330.260.430.320.1650.360.290.230.370.280.140.310.280.1650.321850.250.270.260.370.260.1650.30.230.230.320.220.140.260.220.1650.282400.190.210.260.330.20.160.250.1850.220.290.170.140.220.170.1650.243000.1550.1750.250.310.160.160.220.150.220.270.140.140.1950.1350.160.214000.120.140.250.290.130.1550.20.1250.220.250.110.1350.1750.110.160.1955000.0930.120.250.280.1050.1550.1850.10.220.240.090.1350.160.0880.160.186300.0720.10.250.270.0860.1550.1750.0880.210.230.0740.1350.150.0710.160.17Note : r = conductor resistance at operating temperaturex = reactancez = impedance