300/500V fire resistant Braid-Screened Flexible Equipment Cables (Multipair)LI HCH FE180 (PH30) (CU/SR/OS/LSZH 300/500V Class 5)Application:The cables are designed for indoor instrumentation and control cabling,Website:http://www.ue-cable.com, electrically noisy environments and fire alarm systems in office buildings.STANDARDS:Basic design to VDE 0812/EN 50290-2-27FIRE PERFORMANCECircuit IntegrityIEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180);BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)Circuit Integrity with mechanical shockEN 50200(PH30); CEI 20-36/4-0Circuit Integrity with mechanical shock & water sprayEN 50200 annex ESystem circuit integrityDIN 4102-12, E30 depending on lay systemFlame Retardance (Single VerticalWire Test)EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2;VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*Reduced Fire Propagation(Vertically-mounted bundled wires& cable test)EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4Halogen FreeIEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*No Corrosive Gas EmissionIEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*Minimum Smoke EmissionIEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*No Toxic gasesNES 02-713; NF C 20-454Note: Asterisk * denotes superseded standard.VOLTAGE RATING300/500 VCABLE CONSTRUCTION Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2.Insulation: Fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.Cabling: The insulated cores are cabled in concentric layers with suitable non-hygroscopic fillers.Fire Barrier: Polyester tape + fiber glass tapeOverall screen: Aluminum/polyester tape with tinned copper braid (min. 85% Coverage)Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZHcompound type SW2-SW4 as per BS 7655-2.6 can be offered.)COLOUR CODEInsulation Colour: Per VDE 0812Sheath Colour: Orange (other colours on request)TYPE CODELI Equipment cable with fine stranded conductorH Halogen free ceramic polymer compoundC Copper Wire BraidFE180 Insulation integrity (950°C 180 minutes)PH 90 Fire Test for 90 mins at 830°CPhysical AND THERMAL PROPERTIESTemperature range during operation (fixed state): -30°C – +90°CTemperature range during installation (mobile state): -20°C – +50°CMinimum bending radius: 7.5 x Overall DiameterElectrical PROPERTIESDielectric test:2000 V r.m.s. x 5' (core/core)Insulation resistance≥300 MΩ x km (at 20°C);Short circuit temperature350°CCONSTRUCTION PARAMETERSCable CodeNo. of Core X Cross SectionNominalInsulationThicknessNominalSheathThicknessNominalOverallDiameterApprox.Weightmm2mmmmmmkg/km2 coresLI-HCH FE180 (PH30)2x0.750.60.86.355LI-HCH FE180 (PH30)2x1.00.60.96.962LI-HCH FE180 (PH30)2x1.50.70.97.3793 coresLI-HCH FE180 (PH30)3x0.750.60.86.667LI-HCH FE180 (PH30)3x1.00.60.97.277LI-HCH FE180 (PH30)3x1.50.70.97.61014 coresLI-HCH FE180 (PH30)4x0.750.60.97.285LI-HCH FE180 (PH30)4x1.00.61.07.798LI-HCH FE180 (PH30)4x1.50.71.08.21125 coresLI-HCH FE180 (PH30)5x0.750.60.97.9105LI-HCH FE180 (PH30)5x1.00.61.07.9117LI-HCH FE180 (PH30)5x1.50.71.09.01276 coresLI-HCH FE180 (PH30)6x0.750.60.98.6121LI-HCH FE180 (PH30)6x1.00.61.09.1138LI-HCH FE180 (PH30)6x1.50.71.010.01617 coresLI-HCH FE180 (PH30)7x0.750.60.98.6131LI-HCH FE180 (PH30)7x1.00.61.09.1152LI-HCH FE180 (PH30)7x1.50.71.110.0193Note : Other conductor sizes & core configurations are available upon request.