300/500V SR Insulated & Overall screened fire resistant control cables (2-4 cores & Multicores)(PH30/60) (CU/SR/OS/LSZH 300/500V Class 1)(PH30/60) (CU/SR/OS/LSZH 300/500V Class 2)Application:The cables are primarily intended for use in the following applications:      BS 5266-1 for emergency lighting of premises      BS 5839-1 for fi re detection and fi re alarm systems in and around building      BS 5839-8 for voice alarm systems      BS 5839-9 for emergency voice communication systems.STANDARDS:Basic design to BS 7629-1FIRE PERFORMANCECircuit IntegrityIEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180);BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)Circuit Integrity with mechanical shockEN 50200(PH30/60); CEI 20-36/4-0Circuit Integrity with mechanical shock & water sprayEN 50200 annex ESystem circuit integrityDIN 4102-12,Website:http://www.ue-cable.com, E30 depending on lay systemFlame Retardance (Single VerticalWire Test)EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2;VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*Reduced Fire Propagation(Vertically-mounted bundled wires& cable test)EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4Halogen FreeIEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*No Corrosive Gas EmissionIEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*Minimum Smoke EmissionIEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*No Toxic gasesNES 02-713; NF C 20-454Note: Asterisk * denotes superseded standard.VOLTAGE RATING300/500 VCABLE CONSTRUCTION Conductors: Plain annealed copper wire, solid according to IEC(EN) 60228 class 1, strandedaccording to IEC(EN) 60228 class 2.Insulation: Fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.Cabling: The cores are cabled together in concentric layers with suitable non-hygroscopic fillers.Overall screen: Aluminum/polyester tape with tinned copper drain wire.Circuit Protective Conductor or Drain Wire: Uninsulated tinned copper conductor of the samesection and class as the insulated conductors in the 2-, 3-and 4-core cables. Drain wire of 0.5mm2tinned copper conductor is provided in cables of more than 4 conductors.Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZHcompound type SW2-SW4 as per BS 7655-2.6 can be offered.)COLOUR CODEInsulation Colour:2 cores blue -brown3 cores brown -black -grey4 cores blue -brown -black -grey(Colour Code Up To 4 Cores In Accordance To Hd 308)7 cores centre: brown 1st layer: brown -black -4 cores white12 cores centre: brown -black -white 1st layer: brown -black -7 cores white19 cores centre: brown1st layer: brown -black -4 cores white2nd layer: brown -black -10 cores white(on request the cores can be one colour only, identified by printed numbers)Sheath Colour: Orange (other colors upon request)Physical AND THERMAL PROPERTIESTemperature range during operation (fixed state): -30°C – +90°CTemperature range during installation (mobile state): -20°C – +50°CMinimum bending radius: 6 x Overall DiameterElectrical PROPERTIESDielectric test:2000 V r.m.s. x 5' (core/core)Insulation resistance≥300 MΩ x km (at 20°C)Short circuit temperature350°CCONSTRUCTION PARAMETERSCable CodeNo. of Core X Cross SectionNominal Insulation ThicknessNominal Sheath ThicknessNominal Overall DiameterApprox.Weightmm2mmmmmmkg/km2 core(PH30/60)2x1.00.60.97.180(PH30/60)2x1.50.70.98.095(PH30/60)2x2.50.81.09.4135(PH30/60)2x1.50.70.98.4106(PH30/60)2x2.50.81.09.9145(PH30/60)2x4.00.81.111.52103 core(PH30/60)3x1.00.60.98.095(PH30/60)3x1.50.70.98.5115(PH30/60)3x2.50.81.010.0170(PH30/60)3x1.50.70.98.9134(PH30/60)3x2.50.81.010.3180(PH30/60)3x4.00.81.112.22604 core(PH30/60)4x1.00.61.08.3115(PH30/60)4x1.50.71.09.4150(PH30/60)4x2.50.81.111.0210(PH30/60)4x1.50.71.09.8166(PH30/60)4x2.50.81.111.8250(PH30/60)4x4.00.81.213.53307 core(PH30/60)7x1.00.61.010.0165(PH30/60)7x1.50.71.111.322512 core(PH30/60)12x1.00.61.112.5255(PH30/60)12x1.50.71.214.535019 core(PH30/60)19x1.00.61.215.0380(PH30/60)19x1.50.71.317.0520Electrical PROPERTIESConductor Operating Temperature : 90°CAmbient Temperature : 30°CCurrent-Carrying Capacities (Amp)NominalCrossSectionAreaReferenceMethod 4(enclosed in an conduitinsulated wall etc)Reference Method 3(enclosed in conduit on a wall or ceiling, or in trunking)Reference Method 1 (clipped direct)Reference Method 11(on a perforated cable tray), or Reference Methodone 3-corecable or one4-core cable3-phase a.c.one 2-core cable single phasea.c. or d.c.one 3-corecable or one 4-core cable 3-phase a.c.one 2-corecable singlephasea.c. or d.c.one 3-core cable or one 4-core cable3-phase a.c.one 2-corecable singlephasea.c. ord.c.one 3-core cable or one4-core cable3-phase a.c.12345678mm2AAAAAAA1.516.52219.5242226232.522302633303632430403545404942Voltage Drop (Per Amp Per Meter)Nominal Cross Section Area2-core cable d.c.2-core cable single- phase a.c3-core or 4-core cable 3-phase a.c.1234mm2mV/A/mmV/A/mmV/A/m1.53131272.51919164121210